www.ptreview.co.uk
16
'26
Written on Modified on
600 V Three-Phase Gate Drivers Integrate Bootstrap Diodes and Smart Shutdown
STMicroelectronics' SO-28 devices drive N-channel MOSFETs or IGBTs in fans, pumps and compressors for white goods, with positive or negative input logic versions.
www.st.com

STMicroelectronics has added two 600 V devices, the STDRIVE631P and STDRIVE631N, to its STDRIVE family of three-phase gate drivers, enabling motor drives and inverters to operate directly from a high-voltage bus. Both integrate three half-bridge drivers for N-channel power MOSFETs or IGBTs in an SO-28 package and target fans, pumps and compressors for white goods.
BCD6-OFFLINE Technology and Output Stage
Built in ST's BCD6-OFFLINE technology, the devices withstand below-ground spikes of up to 100 V. Their outputs source 1.0 A and sink 0.85 A, each output integrates a zero-drop bootstrap diode, and propagation delays are matched across all channels. The drivers provide ±50 V/ns dV/dt transient immunity and ESD protection up to 2 kV (HBM), and are rated for an extended temperature range of -40 °C to 125 °C.
Input Logic Options and Integrated Protection
The STDRIVE631P uses positive (active-high) input logic and the STDRIVE631N negative (active-low) logic. An integrated comparator with smart shutdown handles faults such as overcurrent and overtemperature, interlocking and deadtime control prevent cross conduction, and under-voltage lock-out (UVLO) on the low-side and high-side driving sections prevents operation under inefficient or unsafe conditions. Each channel has a dedicated input pin, and a dedicated enable pin simplifies entering low-power shutdown mode.
Smaller Bill of Materials Than Discrete Gate Drive
The integrated bootstrap diodes eliminate external high-side supply components, while the built-in overcurrent protection and UVLO replace circuitry that discrete gate-drive solutions require. Combined with the small package, this reduces the bill of materials, simplifies PCB layout and shrinks overall system size.
Evaluation Boards for FOC and Six-Step Control
The EVLSTDRIVE631P and EVLSTDRIVE631N evaluation boards each contain a complete three-phase inverter built with STGD6M65DF2 IGBTs. They offer selectable single- or three-shunt current sensing and connect to STM32 microcontrollers through a 34-pin motor-control connector for field-oriented control (FOC) or six-step control development.
Additional Context
This section details technical specifications and competitive benchmarking not included in the original news release.
Infineon's 6EDL04I06NT is a comparable 600 V three-phase gate driver IC with six channels, an integrated bootstrap diode, overcurrent protection, enable and fault reporting, and a level shifter based on silicon-on-insulator (SOI) technology. According to Infineon, it sources 0.165 A and sinks 0.375 A, operates from a VCC range of 13 V to 17.5 V and has turn-on and turn-off propagation delays of 530 ns and 490 ns. By comparison, the STDRIVE631P/N deliver higher gate-drive current in both directions, with 1.0 A source and 0.85 A sink capability.
Edited by Aishwarya Mambet, Induportals Editor, with AI assistance.
www.st.com

