www.ptreview.co.uk
17
'26
Written on Modified on
Agentic AI Workflow Links Prompt-Based Gripper Design to Additive Manufacturing
At Formnext 2026, Siemens presents an Industrial AI Digital Thread connecting agentic engineering with an adaptive additive production cell under development in Erlangen.
www.siemens.com

Industrial AI connects engineering and production in an end-to-end Digital Thread for additive manufacturing, enabling adaptive processes from design to manufacturing.
Siemens is presenting an end-to-end Digital Thread powered by Industrial AI for additive manufacturing at Formnext 2026, held from 17 to 20 November in Frankfurt am Main (Hall 12.1, Booth 119D). The approach links agentic, prompt-based engineering with an adaptive production environment, so that individual product requirements pass from design through to manufacturing.
Prompt-Based Engineering of Robotic Grippers
Developed together with AGIBOT, the demonstration uses a gripper for a humanoid robot as an example. Instead of adapting the gripper manually for each new application, the user describes the object to be handled and the required task. An Agentic AI workflow then selects a suitable gripper type, adapts the geometry in Siemens’ Designcenter, simulates the design and validates the robot interface and handling. Through MCP integration, the AI agent accesses functions of the engineering software, orchestrates the work steps and finally prepares the data for additive manufacturing.
The result is an application-specific gripper whose design can be virtually validated and prepared for printing before production begins. By reducing the need to interact directly with each engineering tool and process step, the approach can make complex engineering workflows accessible to a broader group of users.
“Industrial AI is fundamentally changing how we develop and manufacture products. Instead of manually designing variants in a time-consuming process, agentic workflows can orchestrate engineering tasks based on specific requirements. Additive manufacturing is the ideal complement because it enables individual designs to be flexibly turned into physical components. The next step is production that can respond just as flexibly to this variety,” says Karsten Heuser, Vice President Additive Manufacturing at Siemens.
Adaptive Production Cell for Additive Manufacturing
Greater product variety also places new demands on downstream production. Together with EOS and AM Solutions, Siemens is creating an adaptive production cell at its Electronics Factory in Erlangen, in which additive manufacturing, automation, post-processing and software work together in an integrated process chain. The cell is intended to handle different components and production requirements flexibly while enabling repeatable and scalable processes. Post-processing of additively manufactured parts is designed into the cell from the outset.
“The industrialization of additive manufacturing does not end with the printing process. Only when downstream processing steps are seamlessly integrated into the production chain can additive components be manufactured efficiently and reproduced at scale. With the adaptive production cell, we want to demonstrate together how additive manufacturing and automated post-processing can be combined into an integrated industrial process,” said David Soldan, Head of AM Solutions – 3D Post Processing Technology, AM Solutions.
Integrated Data Chains and Application Planning
Integrated software and data chains connect design and simulation with manufacturing preparation, production and operations, giving Industrial AI access to the data needed to link individual process steps. Quality, traceability, security and human responsibility remain key requirements for industrial deployment.
The AM I Navigator, now enhanced with Industrial AI, helps companies identify and prioritise applications for Industrial AI in additive manufacturing, covering both design and engineering and AM production. Based on the results, companies can define pilot projects and develop a roadmap for scaling Industrial AI further.
Edited by Aishwarya Mambet, Induportals Editor, with AI assistance.
www.siemens.com
Siemens is presenting an end-to-end Digital Thread powered by Industrial AI for additive manufacturing at Formnext 2026, held from 17 to 20 November in Frankfurt am Main (Hall 12.1, Booth 119D). The approach links agentic, prompt-based engineering with an adaptive production environment, so that individual product requirements pass from design through to manufacturing.
Prompt-Based Engineering of Robotic Grippers
Developed together with AGIBOT, the demonstration uses a gripper for a humanoid robot as an example. Instead of adapting the gripper manually for each new application, the user describes the object to be handled and the required task. An Agentic AI workflow then selects a suitable gripper type, adapts the geometry in Siemens’ Designcenter, simulates the design and validates the robot interface and handling. Through MCP integration, the AI agent accesses functions of the engineering software, orchestrates the work steps and finally prepares the data for additive manufacturing.
The result is an application-specific gripper whose design can be virtually validated and prepared for printing before production begins. By reducing the need to interact directly with each engineering tool and process step, the approach can make complex engineering workflows accessible to a broader group of users.
“Industrial AI is fundamentally changing how we develop and manufacture products. Instead of manually designing variants in a time-consuming process, agentic workflows can orchestrate engineering tasks based on specific requirements. Additive manufacturing is the ideal complement because it enables individual designs to be flexibly turned into physical components. The next step is production that can respond just as flexibly to this variety,” says Karsten Heuser, Vice President Additive Manufacturing at Siemens.
Adaptive Production Cell for Additive Manufacturing
Greater product variety also places new demands on downstream production. Together with EOS and AM Solutions, Siemens is creating an adaptive production cell at its Electronics Factory in Erlangen, in which additive manufacturing, automation, post-processing and software work together in an integrated process chain. The cell is intended to handle different components and production requirements flexibly while enabling repeatable and scalable processes. Post-processing of additively manufactured parts is designed into the cell from the outset.
“The industrialization of additive manufacturing does not end with the printing process. Only when downstream processing steps are seamlessly integrated into the production chain can additive components be manufactured efficiently and reproduced at scale. With the adaptive production cell, we want to demonstrate together how additive manufacturing and automated post-processing can be combined into an integrated industrial process,” said David Soldan, Head of AM Solutions – 3D Post Processing Technology, AM Solutions.
Integrated Data Chains and Application Planning
Integrated software and data chains connect design and simulation with manufacturing preparation, production and operations, giving Industrial AI access to the data needed to link individual process steps. Quality, traceability, security and human responsibility remain key requirements for industrial deployment.
The AM I Navigator, now enhanced with Industrial AI, helps companies identify and prioritise applications for Industrial AI in additive manufacturing, covering both design and engineering and AM production. Based on the results, companies can define pilot projects and develop a roadmap for scaling Industrial AI further.
Edited by Aishwarya Mambet, Induportals Editor, with AI assistance.
www.siemens.com

